OEM/ODM Factory Drill Bit Tricone - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN
OEM/ODM Factory Drill Bit Tricone - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN Detail:
Product Description
API tricone rock roller bits in the stock from China factory is for drilling rig machinery
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.
4 5/8 inches (118mm) reverse circulation TCI tricone drill bit with central jet hole.
1> Reverse Circulation is a special drilling process, the mud fluid is sucked from hole bottom to ground through central hole, rock chipes could be clear at higher rate than regular circulation.
2>This design of tricone bits has a central jet hole , rock chips could be circulated to ground inside drill pipe.
3>Reverse circulation is always used in drilling pebbles or sparse rocks, the ROP is higher than normal circulation.
4>The tricone rock bit with central hole could be used in both reverse circulation and normal circulation.
Our advanced production lines, international standards (API Spec 7) and adequateinventory supports the drilling projects fordistribution of drilling tools professionally and perfectly.
Our service fields: Oil & Natural gas,HDD & Construction ,Exploration,Mining,Water well , Geothermal ,Foundation ,Environmental.
Product Specification
| Basical Specification | |
| Bit Size | 4 5/8 inches |
| 117.5 mm | |
| Type of Bit | TCI Tricone Bit |
| Thread Connection | 2 7/8 API REG PIN |
| IADC No: | IADC 537G |
| Bearing Type | Journal Sealed Bearing with Gauge Protection |
| Bearing Seal | Elastomer or Rubber/ Metal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | Central Jet Hole |
| Operating Parameters | |
| WOB (Weight On Bit) | 11,909-26,515 lbs |
| 53-118KN | |
| RPM(r/min) | 50~120 |
| Formation | Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Product detail pictures:
Related Product Guide:
We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for OEM/ODM Factory Drill Bit Tricone - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN , The product will supply to all over the world, such as: Vietnam, Cairo, Angola, Create Values,Serving Customer! is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, You should contact with us now!
By Michelle from Korea - 2018.12.14 15:26
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Julie from Kuwait - 2017.09.16 13:44
