OEM/ODM Factory Drill Bit Tricone - API TCI button bit IADC537 9 7/8″(250mm) for hard rock well drilling – FAR EASTERN

Product Detail

Catalog

Feedback (2)

Our business has been focusing on brand strategy. Customers' pleasure is our advertising. We also offer OEM company for mill tooth bit 5 7/8", ASTM A126 GLOBE VALVE, CLASS250 METAL SEAT SWING CHECK VALVE, We warmly welcome small business companions from all walks of lifestyle, hope to establish friendly and cooperative business make contact with with you and attain a win-win objective.

OEM/ODM Factory Drill Bit Tricone - API TCI button bit IADC537 9 7/8″(250mm) for hard rock well drilling – FAR EASTERN Detail:

IADC417 12.25mm tricone bit

Product Description

Tender of API TCI drilling bits in the stock from China factory
We try our best to improve the quality of drill bits.
1)Gauge Protection
Special inserts are strategically arranged on head to effectively reduce head wear in abrasive formation and directional and horizontal wells and extend bit life.
2)Cooling system
The nozzles is very important part in the life of a bit, bit hydraulics are controlled through these nozzles,it is also heat treatment for more strength and stability.
3)Extremely high quality tungsten carbide
High effectively cutting ability and strong anti-breaking ability, which can increase ROP and improve service life of bit effectively

10010(1)
IADC417 12.25mm tricone bit

Product Specification

Basical Specification
Size of Rock Bit	9 7/8 inches
Size of Rock Bit	250.8mm
Bit Type	TCI Tricone Bit
Thread Connection	6 5/8 API REG PIN
IADC Code	IADC 537G
Bearing Type	Journal Sealed Bearing with Gauge Protection
Bearing Seal	Elastomer or Rubber/ Metal
Heel Protection	Available
Shirttail Protection	Available
Circulation Type	Mud Circulation
Drilling Condition	Rotary drilling,high temp drilling,deep drilling,motor drilling
Nozzles	Three Nozzles
Operating Parameters
WOB (Weight On Bit)	56,175-25,391 lbs
WOB (Weight On Bit)	113-250KN
RPM(r/min)	50~220
Formation	Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc.

table

9 7/8″ is 250mm in diameter, the thread connection is 6 5/8 reg pin according to API specification.
IADC537 means that tricone roller bit is suitable for drilling medium hardness rocks like limestone, shale, gypsum, etc. The bearing is elastomer sealed to increase working life.
Tungsten carbide inserts(TCI) is very hard alloy to drilling hard rocks, the heel of cones and arm-back are full inserted with Tungsten Carbide teeth.
It is a common size in mining field, to drill blast hole. In mining drilling, first number for IADC code are usually 6,7,8,and the third number are usually 2 and 5.
According to IADC specifications for tricone bit,”2″ means standard open bearing roller bit,and “5″ means sealed roller bearing bit with gauge protection.
In some countries, 9 7/8″(250.8mm) is often used to drill water well and geothermal well. Drill rig is circulated by mud fluid,instead of compressing air.
Therefore, for different applications, we should choose the right tricone roller bits.

10013(1)
10015
10008

Product detail pictures:

Related Product Guide:

The corporation keeps to the operation concept scientific management, superior quality and performance primacy, consumer supreme for OEM/ODM Factory Drill Bit Tricone - API TCI button bit IADC537 9 7/8″(250mm) for hard rock well drilling – FAR EASTERN , The product will supply to all over the world, such as: Latvia, Johannesburg, Bulgaria, Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.