OEM Supply Drilling Tools Tricone Bits - Roller cone drill biit IADC637 4 5/8″ (118mm) – FAR EASTERN
OEM Supply Drilling Tools Tricone Bits - Roller cone drill biit IADC637 4 5/8″ (118mm) – FAR EASTERN Detail:
Product Description
Wholesale API TCI tricone roller cone drill bits with discounted price in the stock from China supplier for well drilling
Bit Description:
IADC: 637 – TCI journal sealed bearing bit with gauge protection for medium hard formations with high compressive strength.
Compressive Strength:
100 – 150 MPA
14,500 – 23,000 PSI
Ground Description:
Hard,well-compacted rocks such as:hard silica limestones,quarzite streaks,pyrite ores,hematite ores,magnetite ores,chromium ores,phosphorite ores and granites.
We can offer TCI bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.
4 5/8″ TCI tricone bit is widely used in water well drilling, exploration, HDD pilot hole, foundation piling, it has a central jet hole design, so it is also workable for reverse circulation drilling.
The bearing is sealed, the working life is much longer than open bearing roller bits. Conical shape tungsten carbide insert has higher penetrating rate than spherical shape inserts in drilling hard rocks.
Product Specification
| Basical Specification | |
| Size of Rock Bit | 4 5/8 inches |
| 117.5 mm | |
| Bit Type | TCI Tricone Bit |
| Thread Connection | 2 3/8 API REG PIN |
| IADC Code | IADC 637G |
| Bearing Type | Journal Sealed Bearing with Gauge Protection |
| Bearing Seal | Elastomer or Rubber/ Metal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | Central Jet Hole |
| Operating Parameters | |
| WOB (Weight On Bit) | 13,257-31,907 lbs |
| 59-142KN | |
| RPM(r/min) | 40~180 |
| Formation | Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Far Eastern are factory specializes in drill bits,such as tricone bits, PDC bits, HDD hole opener,Foundation roller cutters for water well, oil field, gas well,mining, construction, geothermal, directional boring, and underground foundation work all over the world. Our mission is lowest the cost of drilling-per-meter. Far Easter Drilling’s quality will help you to achieve more.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of OEM Supply Drilling Tools Tricone Bits - Roller cone drill biit IADC637 4 5/8″ (118mm) – FAR EASTERN , The product will supply to all over the world, such as: Mexico, belarus, Mecca, Business philosophy: Take the customer as the Center, take the quality as the life, integrity, responsibility, focus, innovation.We will provide professional, quality in return for the trust of customers, with major global suppliers，all of our employees will work together and move forward together.
By Irma from Leicester - 2017.09.29 11:19
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Dana from Ghana - 2017.09.22 11:32
