Factory wholesale Metal Mine Tricone Bit - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN

Product Detail

Catalog

Feedback (2)

Every single member from our higher effectiveness product sales staff values customers' requires and organization communication for mill tooth bit 6", DUCTILE IRON SWING CHECK VALVE, Oil and gas drilling bits 311mm, Quality 1st, Rate least expensive, Provider is definitely the spirit of our company. We sincerely welcome you to go to our business and negotiate mutual small business!

Factory wholesale Metal Mine Tricone Bit - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN Detail:

IADC417 12.25mm tricone bit

Product Description

IADC537 drill bits

API tricone rock roller bits in the stock from China factory is for drilling rig machinery
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.

4 5/8 inches (118mm) reverse circulation TCI tricone drill bit with central jet hole.
1> Reverse Circulation is a special drilling process, the mud fluid is sucked from hole bottom to ground through central hole, rock chipes could be clear at higher rate than regular circulation.
2>This design of tricone bits has a central jet hole , rock chips could be circulated to ground inside drill pipe.
3>Reverse circulation is always used in drilling pebbles or sparse rocks, the ROP is higher than normal circulation.
4>The tricone rock bit with central hole could be used in both reverse circulation and normal circulation.
Our advanced production lines, international standards (API Spec 7) and adequateinventory supports the drilling projects fordistribution of drilling tools professionally and perfectly.
Our service fields: Oil & Natural gas,HDD & Construction ,Exploration,Mining,Water well , Geothermal ,Foundation ,Environmental.

10008(1)
IADC417 12.25mm tricone bit

Product Specification

Basical Specification
Bit Size	4 5/8 inches
Bit Size	117.5 mm
Type of Bit	TCI Tricone Bit
Thread Connection	2 7/8 API REG PIN
IADC No:	IADC 537G
Bearing Type	Journal Sealed Bearing with Gauge Protection
Bearing Seal	Elastomer or Rubber/ Metal
Heel Protection	Available
Shirttail Protection	Available
Circulation Type	Mud Circulation
Drilling Condition	Rotary drilling,high temp drilling,deep drilling,motor drilling
Nozzles	Central Jet Hole
Operating Parameters
WOB (Weight On Bit)	11,909-26,515 lbs
WOB (Weight On Bit)	53-118KN
RPM(r/min)	50~120
Formation	Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc.

table
10013(1)
10015
10011(1)

Product detail pictures:

Related Product Guide:

Sticking for the perception of Creating products of high quality and producing friends with people today from all around the world, we constantly place the desire of shoppers to start with for Factory wholesale Metal Mine Tricone Bit - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN , The product will supply to all over the world, such as: Seattle, Doha, Croatia, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.