Europe style for Tri Cone Bits - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN
Europe style for Tri Cone Bits - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN Detail:
Product Description
API tricone rock roller bits in the stock from China factory is for drilling rig machinery
Bit Description:
IADC: 537 – TCI journal sealed bearing bit with gauge protection for soft to medium soft formations with low compressive strength .
Compressive Strength:
85 – 100 MPA
12,000 – 14,500 PSI
Ground Description:
Medium hard and abrasive rocks such as sandstones with streaks of quartz, hard limestone or chert, hematite ores, hard, well-compacted abrasive rock such as: sandstones with quartz binder, dolomites, quartzite shales, magma and metamorphic coarse grained rocks.
We can offer TCI bits in avariety of sizes (from 3 3/8″ to 26″) and all most of IADC codes.
4 5/8 inches (118mm) reverse circulation TCI tricone drill bit with central jet hole.
1> Reverse Circulation is a special drilling process, the mud fluid is sucked from hole bottom to ground through central hole, rock chipes could be clear at higher rate than regular circulation.
2>This design of tricone bits has a central jet hole , rock chips could be circulated to ground inside drill pipe.
3>Reverse circulation is always used in drilling pebbles or sparse rocks, the ROP is higher than normal circulation.
4>The tricone rock bit with central hole could be used in both reverse circulation and normal circulation.
Our advanced production lines, international standards (API Spec 7) and adequateinventory supports the drilling projects fordistribution of drilling tools professionally and perfectly.
Our service fields: Oil & Natural gas,HDD & Construction ,Exploration,Mining,Water well , Geothermal ,Foundation ,Environmental.
Product Specification
| Basical Specification | |
| Bit Size | 4 5/8 inches |
| 117.5 mm | |
| Type of Bit | TCI Tricone Bit |
| Thread Connection | 2 7/8 API REG PIN |
| IADC No: | IADC 537G |
| Bearing Type | Journal Sealed Bearing with Gauge Protection |
| Bearing Seal | Elastomer or Rubber/ Metal |
| Heel Protection | Available |
| Shirttail Protection | Available |
| Circulation Type | Mud Circulation |
| Drilling Condition | Rotary drilling,high temp drilling,deep drilling,motor drilling |
| Nozzles | Central Jet Hole |
| Operating Parameters | |
| WOB (Weight On Bit) | 11,909-26,515 lbs |
| 53-118KN | |
| RPM(r/min) | 50~120 |
| Formation | Medium formation with low compressive strength,such as medium,soft shale,medium soft limestone,medium soft limestone,medium soft sandstone, medium formation with harder and abrasive interbeds,etc. |
Product detail pictures:
Related Product Guide:
Sticking for the perception of Creating products of high quality and producing friends with people today from all around the world, we constantly place the desire of shoppers to start with for Europe style for Tri Cone Bits - Tricone Bits IADC537 4 5/8″ (118mm) – FAR EASTERN , The product will supply to all over the world, such as: UK, Estonia, Korea, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Olga from Florence - 2018.06.09 12:42
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Jean Ascher from Greek - 2018.12.22 12:52
